To clean your synthetic carpets, there are three important factors to keep in mind: Vacuum them frequently; Clean spills promptly, and have carpet cleaning professionals cleaned them at least once a year.
Vacuuming your synthetic carpet thoroughly and frequently is the most important thing you can do to maintain its look, particularly in high-traffic areas. You should also use walk-off mats at entrances to minimize the tracking of dirt particles onto the carpet and reduce soil accumulation.
It’s affordable to get a nylon wall to wall carpet. This style of carpet is great since it comes in a large variety of colours and designs. These include twisted loops or frieze design which gives the carpet a curly appearance.
Nylon wears well and is resistant to mechanical pressures due to its elasticity. It is also stain-resistant but needs professional steam cleaning once a year. Steam cleaning will remove dirt that is trapped in the carpet pile. It is a quick and effective carpet cleaning method that utilizes water at its boiling point and cleaning solutions. This loosens and removes dust and dirt that ordinary carpet cleaning doesn’t.
Since synthetic area rugs are ideal for places with heavy foot traffic they will accumulate dirt and dust over time.
At SteamKleen, we offer high-quality cleaning service, using techniques that have been used for thousands of clients across the GTA. We use professional equipment and detergents that are most suitable for nylon and synthetic area rugs.
Why Steam Cleaning?
“Steam Cleaning” is just a nickname for a method of carpet cleaning called “hot-water extraction.”
This is the preferred method of cleaning by major carpet manufacturers. In fact, some require you to use this service at least once every 12-18 months otherwise the warranty on your carpet can be voided.
This type of cleaning is widely considered the best method of removing embedded soils and contaminants in your carpet. Steam cleaning works by injecting a high pressurized solution into the carpet pile, then immediately extracts it with the powerful vacuum system. Most companies will apply a pre-treatment to break down soils, loosen oil deposits and remove spots.
After the cleaning, a protective coating can be applied to your carpet, most of the time for an additional cost. This coating is commonly referred to as “scotch guarding.” This phrase is also just a nickname. What is applied is actually a Teflon. It’s a good idea to have this reapplied, as the scotch guarding applied during the manufacturing process will only last so long.
If a truck-mount system is used, the water can reach over 230 degrees! Water boils at 212 degrees Fahrenheit. Hot water is a key component in any cleanin.
Powerful Vacuum System
Truck-mount systems are basically an engine with a very powerful buit-in blower. The horsepower ranges from 15 to 50, depending on the size of the machine. This engine powers this vacuum so it can create a very powerful suction. This vacuum is so powerful that it can have your carpets dry within a couple hours. There is a misconception that steam cleaning will over-saturate your carpet, soak your padding and take days to dry. This is simply NOT true.